Benoil Services Ltd

7. FRAC BALL SEALS, DROP OR DIVERTER BALLS

Note: Only an outline listing is given here. Full Catalogue listings are given in the paper catalogue. Call for part numbers and details of the availability of a particular specification.

7.1. Epoxy Ball with no surface coating, suitable to 100C

Balls are available in diameters of 1/2", 5/8", 3/4",7/8",1", & above.
Specific Gravity is from 0.80sg to 1.95sg inclusive in increments of 0.05sg.
Part Numbers are 114011-114434.

7.2. Epoxy Ball with no surface coating, suitable to 180C

Balls are available in diameters of 1/2", 5/8", 3/4",7/8",1", & above.
Specific Gravity is from 0.80sg to 1.95sg inclusive in increments of 0.05sg.
Part Numbers are 115011-115434.

7.3. Epoxy Core: Nitrile Rubber 70A, for use to 100C

Balls are available in diameters of 1/2", 5/8", 3/4",7/8",1", & above.
Specific Gravity is from 0.80sg*** to 1.95sg inclusive in increments of 0.05sg.
***Minimum sg varies with diameter. See ' Technical Information' for details.
Part Numbers are 116015-116434.

7.4. Epoxy Core: FCR Rubber 75-80A, for use to 180C

Balls are available in diameters of 1/2", 5/8", 3/4",7/8",1", & above.
Specific Gravity is from 0.80sg*** to 1.95sg inclusive in increments of 0.05sg.
***Minimum sg varies with diameter. See ' Technical Information' for details.
Part Numbers are 117019-117434.


Click here for catalogue     Click here to contact Benoil     Click for the Benoil Homepage
This website was authored by the IT Manager, Benoil.
All pages of this site are © 2008 Benoil Services Ltd.